Description Self-Adhesive Car Headliner Fabric and Vehicle Upholstery Fabric with a Water-Resistant Velours Backing
Faded panels look new again: the soft-finish fabric refreshes headliners, door panels, and worn furniture in one afternoon
No special tools needed: cut it to size and press it on, no sewing or staples required
Handles heat and weather: the water-resistant, heat-tolerant backing holds up inside a hot car or a sunny room
Change your mind without a mess: it lifts off cleanly, with no sticky residue left behind
One roll, endless projects: use the same fabric on car interiors, furniture repairs, or DIY décor
A sagging headliner or a cracked door panel makes the whole cabin look worn out, even when everything else runs fine. This self-adhesive upholstery fabric covers it back up without a trip to an upholstery shop — cut it to size, peel the backing, and press it into place. It works as car headliner fabric for a drooping ceiling or as vehicle upholstery fabric for a tired door panel or seat, and because the backing is heat tolerant, it stays put on hot, sun-baked surfaces instead of loosening over time.
It's just as useful as car ceiling fabric for that sagging spot above your head as it is auto upholstery material for seats, panels, and trim, and off the road it works equally well as car seat fabric or a furniture and DIY covering. The velours-finish surface applies without special tools, and the temperature-resistant adhesive is rated to handle continuous heat as well as short bursts well above it, so it doesn't peel loose on a hot dashboard or a sun-warmed door panel.
Why choose Vepine
Self-Adhesive Upholstery Fabric
Feature
Vepine
Others
Peel-and-stick application with no special tools
✓
✕
Rated for continuous heat up to 100°C
✓
Lower rating
Removes cleanly without leaving residue
✓
✕
Adds UV protection against fading
✓
No UV block
Two roll widths for small or large jobs
✓
One width only
30-day easy returns
✓
Varies
Key Features
Soft, Long-Lasting Surface: A microfiber top layer feels comfortable and holds up over repeated use.
Simple to Cut and Apply: It trims to size easily and adheres securely, rated at a 96.8% customer satisfaction level.
Water-Resistant and Heat Tolerant: Built to handle damp conditions and warm environments alike.
Removable Without Residue: Peels away cleanly whenever you want to change or replace it.
Multi-Use Application: One versatile fabric that suits automobiles, home furnishings, and everyday DIY tasks alike.
Application Areas: Use it around the vehicle for headliners and door panels, or move it indoors for furniture fixes and decorative projects.
Specifications
Material: Premium synthetic leather velours
Available sizes: 7.9" x 59.1" (20.1 x 150.1 cm), 19.7" x 59.1" (50 x 150.1 cm)
Features: Waterproof, UV protection, insulating properties
Adhesive: Self-adhesive, heat resistant
Temperature tolerance: Continuous: 212°F (100°C), Short-term: 266°F (130°C)
Package contains: Velours fabric (continuous length) + 1 × free spatula
Available Colors: Black, Beige, Brown, Burgundy, Light gray, Dark gray, Dark blue, Red, White, Yellow, Royal blue, Orange, Emerald green, Turquoise, or Chestnut brown
Package Includes:
1 × Velours Fabric Roll (continuous length)
1 × Free Spatula
Right for you if
✓ Your headliner sags or your door panel looks worn — this fabric presses on and refreshes it
✓ You're working on a hot dashboard or sun-warmed panel — the adhesive is rated to 130°C short-term
✓ You want to change the look later — it peels away without leaving residue
✓ You need one roll for the car and for furniture at home — it works on both
If two or more of these sound like you, this is the one.
FAQs Q: Does this fabric actually stick without special tools?
Q: Can I use it inside a hot car?
Q: Will the roll look creased when it arrives?
Q: What sizes does the roll come in?
Q: Will it damage the surface if I remove it later?
Product form
No tools, just peel and press
Handles heat without peeling
$63.75
$82.88
Save $19.13 (23%)
This offer ends
American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa
Guaranteed secure & safe checkout.
Free USPS shipping within the U.S., tracking included
30-day money-back guarantee. Not happy? Full refund.
Buy 2 save 10% · Buy 3 save 15% — applied at checkout
Description Self-Adhesive Car Headliner Fabric and Vehicle Upholstery Fabric with a Water-Resistant Velours Backing
Faded panels look new again: the soft-finish fabric refreshes headliners, door panels, and worn furniture in one afternoon
No special tools needed: cut it to size and press it on, no sewing or staples required
Handles heat and weather: the water-resistant, heat-tolerant backing holds up inside a hot car or a sunny room
Change your mind without a mess: it lifts off cleanly, with no sticky residue left behind
One roll, endless projects: use the same fabric on car interiors, furniture repairs, or DIY décor
A sagging headliner or a cracked door panel makes the whole cabin look worn out, even when everything else runs fine. This self-adhesive upholstery fabric covers it back up without a trip to an upholstery shop — cut it to size, peel the backing, and press it into place. It works as car headliner fabric for a drooping ceiling or as vehicle upholstery fabric for a tired door panel or seat, and because the backing is heat tolerant, it stays put on hot, sun-baked surfaces instead of loosening over time.
It's just as useful as car ceiling fabric for that sagging spot above your head as it is auto upholstery material for seats, panels, and trim, and off the road it works equally well as car seat fabric or a furniture and DIY covering. The velours-finish surface applies without special tools, and the temperature-resistant adhesive is rated to handle continuous heat as well as short bursts well above it, so it doesn't peel loose on a hot dashboard or a sun-warmed door panel.
Why choose Vepine
Self-Adhesive Upholstery Fabric
Feature
Vepine
Others
Peel-and-stick application with no special tools
✓
✕
Rated for continuous heat up to 100°C
✓
Lower rating
Removes cleanly without leaving residue
✓
✕
Adds UV protection against fading
✓
No UV block
Two roll widths for small or large jobs
✓
One width only
30-day easy returns
✓
Varies
Key Features
Soft, Long-Lasting Surface: A microfiber top layer feels comfortable and holds up over repeated use.
Simple to Cut and Apply: It trims to size easily and adheres securely, rated at a 96.8% customer satisfaction level.
Water-Resistant and Heat Tolerant: Built to handle damp conditions and warm environments alike.
Removable Without Residue: Peels away cleanly whenever you want to change or replace it.
Multi-Use Application: One versatile fabric that suits automobiles, home furnishings, and everyday DIY tasks alike.
Application Areas: Use it around the vehicle for headliners and door panels, or move it indoors for furniture fixes and decorative projects.
Specifications
Material: Premium synthetic leather velours
Available sizes: 7.9" x 59.1" (20.1 x 150.1 cm), 19.7" x 59.1" (50 x 150.1 cm)
Features: Waterproof, UV protection, insulating properties
Adhesive: Self-adhesive, heat resistant
Temperature tolerance: Continuous: 212°F (100°C), Short-term: 266°F (130°C)
Package contains: Velours fabric (continuous length) + 1 × free spatula
Available Colors: Black, Beige, Brown, Burgundy, Light gray, Dark gray, Dark blue, Red, White, Yellow, Royal blue, Orange, Emerald green, Turquoise, or Chestnut brown
Package Includes:
1 × Velours Fabric Roll (continuous length)
1 × Free Spatula
Right for you if
✓ Your headliner sags or your door panel looks worn — this fabric presses on and refreshes it
✓ You're working on a hot dashboard or sun-warmed panel — the adhesive is rated to 130°C short-term
✓ You want to change the look later — it peels away without leaving residue
✓ You need one roll for the car and for furniture at home — it works on both
If two or more of these sound like you, this is the one.
FAQs Q: Does this fabric actually stick without special tools?
Q: Can I use it inside a hot car?
Q: Will the roll look creased when it arrives?
Q: What sizes does the roll come in?
Q: Will it damage the surface if I remove it later?
